KOMPOZITOR

KOMPOZITOR LTD's profile involves the development and production of resins reinforced with glass, carbon and other high-tensile fibres, which are referred to as composites in the profession. Within this field the company primarily deals with heat and fire-resistant composites. Our development work takes place in four areas at the same time: chemistry, mechanical engineering, production technology and application technology. In the scope of this activity and on the basis of its own patent, KOMPOZITOR LTD. has developed, produces and distributes FuranFlex® chimney lining material.

KOMPOZITOR LTD. will provide help in solving any problem occurring in connection with composites, our specialists endeavour to find a solution for everything.

KOMPOZITOR LTD. now operates in a new building, which was built in 2008 at the address above using its own resources.

DIMENSIONS:

Plot: Area of building:

7800 m2 2600 m2 ground floor 1000 m2 1st floor 500 m2 2nd floor

Kompozitor's philosophy

Development comes before everything else

The conditions of successful development:
Imagination - Skill - Courage - Work - Luck

KOMPOZITOR uses the first four conditions, and the fifth condition is supported by the former.

KOMPOZITOR's slogan: "ALWAYS NEW SOLUTIONS, NEVER COPYING"
KOMPOZITOR KFT. is owned by two Hungarian citizens. Number of employees: 35. These include five mechanical engineers, three chemical engineers and 4 technicians, including ambitious young people and experienced older people too.
We communicate in English, French, German, Russian, and, if necessary, in Latin.
KOMPOZITOR KFT. closely cooperates with subcontractors and universities.

Kompozitor Kft.'s present products

ICOPREG Resin-impregnated textile glass fibre produced in the form of a roll (pre-preg). By pressing soft Icopreg at a temperature of 120-140 °C, a 0.3 mm thick fire-resistant sheeting with strength identical to that of steel can be produced. Perfectly binds to wooden panels. EXAMPLES OF USE Fire and impact-resistant sandwich plate (2,5-5 mm) Internal surfacing of vehicles, buildings Composition: Icopereg-Wooden sheet-Icopreg-Coloured paper Fire retardant wooden doors(Thickness: 45-60 mm) In traditional wooden doors 4-6 layers of 0.3 mm thick Icopreg sheeting results in 30-45-60 minutes of resistance to fire. Fire-retardant partition walls (10-30 mm) Internal walls of vehicles Composition: Formica-Icopreg-Wooden panel-Icopreg-Formica

TERMOPANEL Fire and corrosion-resistant composite panel. In the case of guard-plate welding and flames Thickness: 1-15 mm, heat-resistance: 280 °C continuously, 1,000 °C for a short period. It has the strength of steel.

TRANSPOLYM Distance rod between the coil and iron core in transformers. Instead of wooden rods, the material filled into a transformer in a liquid state hardens in a composite form and forms a supporting rod, which is more precise and stronger than wood.

TRANSRING Transformer coil clamping ring.A composite ring of a maximum diameter of 2,000/1,200 mm, with a thickness of 50-150 mm, resistant to heat and oil, of outstanding strength even when exposed to pressure as great as 200 tons.

MULTISHEET Fibreglass reinforce polyester plate production line Continuous production of flat plates, plates of various profiles and longitudinal corrugation. Maximum width: 2 m. ARTRIG Reinforcing composite resin mixture. To increase the rigidity of hollow closed steel sections, e.g.: the frame structures of buses and ships. BETREPAIR Concrete repairing set Polymer concrete adhering to old concrete. Simple packaging, for immediate use without measurements or special skills. UNIBASE Liquid for increasing adhesion. Significantly increases the adhesion of paints, resins to any surface.

REKALOR
Air-Air heat exchanger. A heat exchanger made of 100% plastic. It can be used between temperatures of -40 °C - +150 °C. Corrosion resistant, favourable efficiency.

CARBOSPREAD MACHINE
Unidirectional carbon fibre pre-preg machine. From a carbon cable consisting of 50,000 fibres, this machine makes resin-impregnated, 500 mm wide, unidirectional textile for high-tech composite production.

POLYKAMIN
Industrial chimney
For more details see this page

FURANFLEX®
Composite chimney
For more details see this page

The foundation of Kompozitor Ltd.

KOMPOZITOR LTD. was founded in 1991. After forty years, the socialist political and economic system was changed in Hungary in the same year. The founding members of KOMPOZITOR Ltd. worked in the then state-owned Plastic Industry Research Institute, in the department dealing with fibre-reinforced resins (composite materials). Research was performed there at a high level in the fields of processes, chemistry, mechanical engineering and industrial applications.

A FEW EXAMPLES OF THE PROJECTS REALISED:

• Machines producing laterally and longitudinally corrugated polyester sheeting
• Machines producing polyester pre-preg
• Resin-catalyst pneumatic feeding machines
• Colour changing peroxide catalyser patent
• Filter made of a composite material for filtering cast iron of a temperature of 1,450 °C
• Construction of composite silos of a volume equivalent to 100 wagons, with a diameter of 10 m

KOMPOZITOR PLASTICS DEVELOPING LTD. was founded on the basis of this professional experience from the above research institute.

FuranFlex® was developed between 1994 and 1998. At this point the first installations took place in Hungary. Mr Thomas Stenquist, the then owner of the Swedish Isokern company provided significant support when he opened the Swedish market for FuranFlex® in 2000. From that point the FuranFlex® technology spread rapidly in Europe.